Skip to content

Black Friday

25% off every projector screen

Ends in

Shop the sale

Black Friday sale: 25% off every projector screen, ending 30 November.

Shop now

Business

Boardroom Projector Screens: Why Motorised Wins on Daily Use

November 8, 2026

A motorised projector screen that drops from the ceiling at the right moment feels like a small piece of magic. You say the word, the lights dim, the screen glides down, and the room quietly turns into a cinema. But between that vision and reality sits a less glamorous question: how does the screen actually receive the command? The answer depends on what you already have in the room — a smart speaker, a home automation hub, or simply a remote in a drawer.

This guide is for anyone planning an electric screen in a living room, loft, or meeting space who wants voice or scene control without disappointment. We will look at what works reliably, where infrared and relay control differ, and what the screen itself must still get right. No invented specs, no wishful thinking — just the practical wiring and habits that make voice control dependable.

Key takeaways

  • Voice control usually controls a relay or hub, not the screen directly. The screen still needs a trigger it understands: infrared, radio frequency, or a dry-contact relay input.
  • IR is line-of-sight and one-way. It works well for a single remote, but scene integration is clumsy because the hub cannot confirm the screen moved.
  • Relay or dry-contact control is the reliable path for scenes. A smart relay or AV controller closes a contact, and the screen treats it like a wall switch.
  • Check the screen’s control inputs before buying. Not every electric screen exposes a relay terminal; some rely on RF remotes only.
  • Size, flatness, and ambient light still decide picture quality. Voice control is convenience, not image performance.
  • 16:9 matte white remains the sensible default for UK rooms; pair it with lighting control rather than chasing exotic screen materials.

What “voice control” really means for a projector screen

When someone says they want voice control for an electric projector screen, they usually mean one of two things. The first is direct: “Alexa, lower the screen.” The second is indirect: a scene called “Movie night” that dims the lights, closes the blinds, and drops the screen in one go. The second is more useful and more achievable.

The screen itself is a motor with a control board. It does not understand voice. Something in the middle has to translate your spoken command into a signal the motor accepts. That middle layer is where the practical limits live.

The three common control paths

  • Infrared (IR): a handset or blaster sends a line-of-sight signal. Simple, but one-way.
  • Radio frequency (RF): a remote or hub sends a radio command. No line of sight needed, but still often one-way.
  • Relay / dry contact: a smart relay or AV controller physically closes a circuit. The screen behaves as if a wall switch was pressed. This is the most integration-friendly option.

If your electric screen only has an RF handset and no relay input, you can still use voice — but usually by teaching an IR blaster the handset’s codes, or by using a hub that can emulate the RF remote. That works, though it is less tidy than a wired relay.

IR versus relay: the practical difference

Infrared is the easy option because many smart hubs include an IR blaster. You point it at the screen, teach it the “down” and “stop” commands, and add those to a scene. The catch is reliability. IR needs a clear line of sight, and it is one-way: the hub sends the command but never knows whether the screen actually moved. If someone leaves a chair in the way, or the blaster drifts, the scene silently fails.

Relay control is less glamorous but far more dependable. A smart relay module — or a dedicated AV controller with relay outputs — wires into the screen’s control terminals. When the scene runs, the relay closes for a moment and the screen drops. Because it is a physical contact, there is no aiming and no code learning. The trade-off is installation: you need a qualified person to wire it safely, and you need a screen that exposes those terminals.

Factor Infrared (IR) Relay / dry contact
Line of sight Required Not required
Feedback to hub Usually none Can be wired for status
Scene reliability Moderate High
Installation effort Low Moderate — needs wiring
Best for Retrofit, single room New installs, integrated scenes

Neither path is wrong. If you are adding voice control to an existing setup and the screen is already on the ceiling, an IR blaster is often the least disruptive route. If you are planning the room from scratch, ask for a screen with relay terminals and wire it properly. Your future self will thank you.

What the screen must still get right

Voice control is a convenience layer. It does not fix a screen that is too small, too dim, or fighting a bay window full of afternoon sun. Before you worry about scenes and commands, get the fundamentals settled.

Size and viewing distance

For a 16:9 screen, a sensible rule of thumb is roughly 2.5–4 m (8–13 ft) from a 100″ screen, depending on whether you prefer immersion or a calmer view. An 84″ screen suits smaller rooms and closer seating; a 120″ screen needs more space and a projector with enough light output to fill it. Measure the wall, the ceiling height, and the sofa position before choosing.

Flatness and surface

A matte white surface with a tensioned or well-weighted drop gives you an even image. Wrinkles and curl show up most in bright scenes and slow camera pans. Electric screens with a weighted bottom bar tend to hang flatter than basic pull-downs, which matters if the screen is in daily use.

Ambient light

No screen material can outperform a room with uncontrolled daylight. If your living room has a large window, plan blackout blinds or curtains as part of the same project. A 16:9 matte white screen plus proper blackout is a far better investment than chasing an exotic material that promises to defeat the sun.

Building a reliable voice scene

The most satisfying setup is a scene, not a single command. “Movie night” should dim the lights, close the blinds, drop the screen, and switch the projector input. Doing this well takes a little planning.

  1. Choose the trigger. A voice assistant, a wall panel, or a remote button all work. Voice is convenient, but a physical button is faster when the room is busy.
  2. Sequence the actions. Drop the screen first, then dim the lights, then power the projector. This avoids the projector shining onto a moving screen.
  3. Add a stop command. Electric screens usually support up, down, and stop. Include stop in your scene logic so a mis-trigger does not leave the screen halfway.
  4. Test failure modes. What happens if the relay is offline? What if someone says the command twice? A good scene is boring because it works every time.

If you are integrating the screen into a broader smart-home routine, our guide to projector screens as a smart home hub for multimedia content covers the wider picture. For the wiring side, the ceiling mount installation tips are worth reading before you commit to a position.

Which ABIS screen fits?

For voice-controlled scenes, an electric screen with a remote and a clean drop is the natural starting point. These are the in-stock options that suit the job.

100″ Electric Projector Screen 16:9

The most versatile size for a UK living room or small meeting room. It sits comfortably in the 2.5–4 m viewing range and gives a generous image without overwhelming the wall. The motorised drop and remote make it the easiest screen to fold into a scene. View the 100″ Electric screen.

120″ Electric Projector Screen 16:9

Choose this if you have a dedicated room or a long wall and seating around 3.5–4.5 m back. The larger canvas suits film nights and sports, but check ceiling height and projector brightness before committing. View the 120″ Electric screen.

84″ Electric Projector Screen 16:9

A sensible fit for a loft, snug, or smaller lounge where space is tight. It keeps the motorised convenience without demanding a huge wall. View the 84″ Electric screen.

If you prefer a manual pull-down — perhaps because there is no power at the screen position — the 100″ Manual screen is a practical alternative. It will not join a voice scene, but it is reliable and simple.

Frequently asked questions

Can I control an electric projector screen with Alexa or Google Home?

Yes, but usually through an intermediary. You need a smart hub, IR blaster, or relay module that can send the screen a command it understands. The screen itself does not connect directly to Alexa or Google.

Do all electric screens support relay control?

No. Some rely on RF remotes only. If relay control matters to you, check the product documentation or ask before buying. A screen with dry-contact terminals is much easier to integrate into scenes.

Is IR or relay better for voice control?

Relay is more reliable for scenes because it does not need line of sight and can be wired for status feedback. IR is easier to retrofit and fine for a single room if the blaster has a clear view of the screen.

Will voice control work if the Wi-Fi is down?

Cloud-based voice assistants need an internet connection. Local relay control or a physical wall switch will still work, which is one reason to keep a wired option in the room.

Can I add voice control to an existing manual screen?

Not directly. A manual pull-down has no motor or control board. You would need to replace it with an electric model to integrate it into a voice scene.

Getting the setup right

Voice control for an electric projector screen is achievable, but it rewards planning. Decide early whether you want a simple IR blaster or a proper relay integration, and choose a screen that exposes the control inputs you need. Then measure the room, pick the size that suits your seating distance, and treat blackout and lighting as part of the same job.

Start by measuring your wall and ceiling height, then browse the electric projector screens category to compare sizes. If you are unsure which control method suits your room, contact the ABIS team with your setup details and we will point you in the right direction.